Hot Sale Fishing Tools Oversize Guide with High Quality and Good Price

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: all
• Manufacturing Process: CNC Milling
• Surface Treatment: Spray-Paint
• Operation Pressure: Atmospheric Pressure
• Material: Alloy
• Key Word: Oversize Guide
• Color: Support Customization
• Specific: Fishing Tools
• Transport Package: Standard Export Packing
• Specification: standard
• Trademark: JM
• Origin: China
• HS Code: 84314310
• Production Capacity: 100 Sets / Month

Product Description

Product Description

Extension Sub
An extension sub is assembled between the top sub and the bowl. It is used when the upper portion of the fish is damaged or cannot be engaged. This accessory will permit the overshot to be lowered far enough over the fish to ensure secure engagement and pack off. They are available in lengths from 24 to 60 inches. When ordering, specify overshot O.D. Unless otherwise specified Extension Subs will be furnished in a standard 36-inch length.

Wall Hook Guide
If the fish is positioned in a washed out section of the hole, it  may be difficult to engage the top of the fish using a conventional overshot guide. A wall hook guide can be used to capture the neck of the fish, centralize it, and then properly guide the fish into the bowl.

Oversize Guide
Oversized Guide properly guides the fish into the overshot when the hole size is considerably larger than the diameter of the fish  and the overshot may pass alongside the fish without engaging it. Installation of an oversized guide instead of a standard guide will ensure alignment of the fish with the overshot.

Mill Extension
Overshot Mill Extension interiors are faced with lncoloy to a size that will mill away a flared or jagged fish to enable it to pass up into and be engaged by the Grapple in the Bowl. Mill Extensions are installed between the Bowl and the standard, oversize or wall hook guides.

Mill Guide
Overshot Mill Guides are designed to remove badly flared or jagged metal from the top of the fish. Mill Guides are used in place of the Standard or Oversized Guide to trim the fish so it can enter the overshot.

Product Parameters

Model	OD of lower end × OD of upper end (mm)	Bottom Conn. × Top Conn.	ID (mm)	L of cup (mm)	OAL (mm)	Hole size (mm)	Product Code
LB79	79×79	2 3/8 REG B*P	19	250	845	88.9-98.4	L14-7900
LB89	89*78	2 3/8 REG B*P	19	250	845	108-117.5	L14-8900
LB94	94*79	2 3/8 REG B*P	19	250	850	108-117.5	L14-9400
LB102	102*93	2 7/8 REG B*P	31.8	250	850	117.5-124	L14-10200
LB114	115*105	3 1/2 REG B*P	38.1	250	915	130-149	L14-11400
LB118	118*105	3 1/2 REG B*P	38.1	250	875	139.7-149	L14-11800
LB127	127*108	3 1/2 REG B*B	38.1	250	850	152.4-162	L14-12700
LB127	127*108	3 1/2 REG B*P	38.1	250	915	152.4-162	L14-12710
LB133	133*121	3 1/2 REG B*NC38 B	38.1	250	775	152.4-162	L14-13300
LB133	133*108	3 1/2 REG B*P	38.1	250	915	152.4-162	L14-13310
LB133	133*121	3 1/2 REG B*NC38 P	38.1	250	875	152.4-162	L14-13320
LB133	133*121	NC38 P*B	38.1	250	875	152.4-162	L14-13330
LB140	140*121	3 1/2 REG B*NC38 B	38.1	250	775	165-190.5	L14-14000
LB140	140*108	3 1/2 REG B*P	38.1	250	850	165-190.5	L14-14010
LB140	140*121	NC38 B*P	50.8	250	915	165-190.5	L14-14020
LB146	146*121	3 1/2 REG B*NC38 B	38.1	250	915	168-190.5	L14-14600
LB146	146*108	3 1/2 REG B*P	38.1	250	875	168-190.5	L14-14610
LB165	165*152	4 1/2 REG B*NC46 B	57.2	250	915	190.5-216	L14-16500
LB165	165*140	4 1/2 REG B*P	57.2	250	915	190.5-216	L14-16510
LB168	168*146	4 1/2 REG B*B	57.2	250	915	190.5-216	L14-16800
LB168	168*152	4 1/2 REG B*NC46 B	57.2	250	915	190.5-216	L14-16810
LB168	168*140	4 1/2 REG B*P	57.2	250	915	190.5-216	L14-16820
LB178	178*159	4 1/2 REG B*NC50 B	57.2	250	915	219-244.5	L14-17800
LB178	178*165	4 1/2 REG B*NC50 B	57.2	250	915	219-244.5	L14-17810
LB178	178*159	4 1/2 REG B*NC46 B	57.2	250	915	219-244.5	L14-17820
LB178	178*146	4 1/2 REG B*P	57.2	250	915	219-244.5	L14-17830
LB178	178*165	NC50 P*B	57.2	250	940	219-244.5	L14-17840
LB194	194*165	4 1/2 REG B*NC50 P	71.4	250	950	229-273	L14-19400
LB219	219*178	6 5/8 REG B*NC50 B	76.2	250	915	244-289	L14-21900
LB219	219*197	6 5/8 REG B*P	76.2	250	915	244-289	L14-21910
LB219	219*203	6 5/8 REG B*P	76.2	250	915	244-289	L14-21920
LB241	241*203	6 5/8 REG B*P	76.2	250	950	292-330	L14-24100
LB245	245*203	6 5/8 REG B*B	76.2	250	915	292-330	L14-24500
LB245	245*203	6 5/8 REG B*P	76.2	250	950	292-330	L14-24510
LB245	245*203	6 5/8 REG P*B	76.2	250	940	292-330	L14-24520
LB273	273*203	6 5/8 REG B*P	76.2	250	945	330-375	L14-27300
LB327	327*241	7 5/8 REG B*B	76.2	250	950	375-444.5	L14-32700
LB327	327*241	7 5/8 REG B*P	76.2	250	965	375-444.5	L14-32710
LB327	327*241	7 5/8 REG P*B	76.2	250	1040	375-444.5	L14-32720

 

Detailed Photos